Set the compressor air pressure regulator to a maximumof 80 psi for rigid PVC pipe systems, or 50 psi for flexibleblack polyethylene pipe. Then turn off the water supply and set thesystem timer to open just one zone. Next, open the manualdrain valve at the end of that zone (if equipped).
.
Subsequently, one may also ask, how do I winterize my sprinkler system?
How Do I "Winterize" My Irrigation System
- Insulate your assets: Shut off the water supply to theirrigation system.
- Stay in control: If you have an automatic system then you willneed to "shut down" the controller (timer).
- Drain the pipes:
- Protect valves and backflow preventers:
Furthermore, how much does it cost to winterize your sprinkler system? Sprinkler System Winterization AverageCosts Hiring a professional to winterize asprinkler system typically costs $50 to $150 dependingon the system size and local rates. Air compressor rentalruns approximately $30 to $60 per day. A half-day rental,which should be sufficiently long for the job, is slightlycheaper.
Similarly one may ask, when should I winterize my sprinkler system?
When temperatures start to fall, it's timeto consider winterizing your sprinkler system.Your lines must be drained or blown out using an air compressorbefore the first hard freeze. A hard freeze is when the outdoor airdips below 0 degrees Fahrenheit.
How do I drain the water from my sprinkler system?
Manual Drain Valve
- Locate the manual drain valves situated downstream of each zonevalve.
- Turn off the water supply by closing the main valve to thesprinkler system.
- Open all the manual drain valves for each zone in the system,and leave them open so that all the water drains from the pipes andsprinkler heads.
Do I need to winterize my sprinkler system in Texas?
In our service area, we generally donot winterizesprinkler systems by draining the pipes in the winter, as thesoil insulates them enough to prevent the water from freezing. Ifthere is any aboveground equipment, it will need to beinsulated to prevent freezing during the cold nights.How do I winterize my sprinkler system in Texas?
Winterize Your Irrigation System- Turn “off” the timer - To prevent water waste,simple turn off your system this winter.
- Turn “off” the backflow device - Turning off thebackflow device preventso water flow to the irrigation system,which can potentially freeze during the winter.
How do I bleed my sprinkler system?
How to Bleed a Sprinkler System- Locate and turn off the main water valve for your sprinklersystem by turning the valve in the clockwise direction until it isfully closed.
- Locate the sprinkler head.
- Detach the sprinkler head from the main water line.
- Drain the main valve into a bucket by turning it clockwise witha socket wrench.
When should I blowout my sprinklers?
A sprinkler blowout is usually best done in October inthe northern climate of the United States. When to turn offyour sprinkler, however, can be a delicate balance ofgood timing and luck.Sprinkler system repairs can include:
- replacing blown out pumps.
- defective backflow preventers.
- cracks – a huge water waster.
How do you winterize a drip irrigation system?
Winterizing an Irrigation System- Shut off and drain the system. Shut off the main water supplyand remove the faucet assembly (timer, filter, pressure regulator,etc.) at the start of the system.
- Blowing out the lines. Another common method is to blow out thelines using compressed air.
- Seal off the open lines.
- Spring start-up.
