To prolong the life of the finish of your new PRS instrument, we highly recommend that after each use the entire instrument, including the strings, be wiped thoroughly with a soft, clean, dry cloth. We recommend PRS Guitar Cleaner and/or PRS Guitar Polish for all PRS guitars with our normal acrylic or V12 finish..
Accordingly, how do you clean a PRS pickup?
Spray a few spritzes onto a microsuede cleaning rag and rub it on the top, back, and sides of your guitar's body. PRS Guitar Cleaner also works well to clean your nickel or gold pickups.
One may also ask, how do you use a fretboard conditioner? Apply a fretboard conditioner to the fretboard and gently rub the conditioner into the wood with the steel wool pad, turning it frequently. Move across the fretboard, cleaning the wood between the frets, and then work the pad along the side of each fret.
Beside above, what finish does PRS use?
Several PRS models, including our Sunburst, Satin, Modern Eagles, and DGT models use a nitrocellulose finish in order to provide the classic feel and tone of vintage instruments. In 2010, PRS Guitars introduced its new V12 finish.
What is nitrocellulose finish?
It was composed of cellulose treated with nitric acid and a solvent. It is an exceptionally fast-drying solvent finish and a stronger version of the original shellacs and varnishes. Nitrocellulose lacquer can be applied in multiple coats, but the resulting finish is still thin and protective.
Related Question Answers
Which guitars have nitrocellulose finish?
Nitrocellulose lacquers have been around for almost a century; originally used for acoustic instruments, saxophones and even cars. This finish later became a popular choice for Fender and Gibson in the '50s and '60s, who used it almost exclusively for their electric guitars.What is the best oil for a rosewood fretboard?
Fret Doctor is basically bore oil, which is really the only thing you want to put on wood. "Lemon oil" is just lemon scented mineral oil, and mineral oil does not penetrate wood. A good cleaning with naphtha followed by a little bore once a year is plenty.What kind of oil do you use on a fretboard?
The wood can dry out over time, and an oil like this, or linseed oil, or even mineral oil, can protect the wood and beautify it as well. Don't overdo it. Once a fretboard has been oiled a few times, you can slow down the frequency.What is the best fretboard oil?
At a Glance: Best Fretboard Oils on the Market - Music Nomad MN105 F-ONE.
- Gerlitz GGH Guitar Honey.
- Roche Thomas.
- Music Nomad MN702.
- Jim Dunlop 6554.
- Planet Waves.
- Kyser Dr.Stringfellows.
- Peavey Lemon Oil.
Can I use baby oil on my fretboard?
mineral oil (including baby oil and most lemon oils) doesn't contain petrolium distillates but its still not good for fretboards. It will make the board look nice but won't penetrate and condition properly. Lemon oil (the real stuff) is a good cleaner but you still want to use a conditioning oil like Fret Doctor.How do you moisturize a fretboard?
You don't need to apply much — you can put the oil on a cloth (not too much, just a bit), and then use the damp cloth to wipe your fretboard. By doing this — a quick, dry wipe for fingerprints and oils, and then a deep clean every six months to moisturize — your fretboard should be good to go for many years to come.What do you clean a rosewood fretboard with?
Clean the fretboard – Use fine steel wool to remove stubborn gunk from Rosewood/Ebony/Pau Ferro fretboards, and apply Lemon Oil to re-hydrate. Use a damp cloth to clean Maple fretboards. Polish the guitar body – For Poly-finished (gloss) guitars, spray guitar polish onto a soft cloth and wipe down.Can I use coconut oil on my fretboard?
It's safe. Use it only on the unfinished wood like the fretboard and bridge. The wood can dry out over time, and an oil like this, or linseed oil, or even mineral oil, can protect the wood and beautify it as well. Don't overdo it.Can I use water to clean my guitar?
Yes, you can use water in the form of a clean damp-only cloth. I use the dampened cloth with elbow grease and a dampened soft toothbrush to clean the board and the areas around the frets - rub-a dub-dub - then buff dry with a clean dry cloth. You can do this at every string change if you need to.Can you use olive oil on a guitar fretboard?
Olive oil, or any other vegetable-based oil, is not recommended for oiling any wood as it may go bad, or rancid, after a while. Most commercially available fretboard oils use mineral oil as their main ingredient.Can you oil fretboard with strings on?
5280 ft. If you are careful and apply oil sparingly and slowly, you can use q-tips to oil your fretboard with strings on. You can see where you are applying oil and it's pretty easy to see that you can get under each string from both sides without making contact with the strings themselves.Should I use lemon oil on my fretboard?
“Lemon Oil” Products (Fretboard Lemon Oils) It's bad for business. For this reason, most of the guitar lemon oils on the market are 100% safe when used in moderation on your guitar's rosewood or ebony fretboard (don't use lemon oil on maple–more on that below).How often should I polish my frets?
Frets get a clean, dry cloth rubdown with string changes (every 1-2 weeks). Our guitars get A LOT of play. About once a month or so I rub a little Never-Dull on the frets (over a template to protect the fingerboard wood) and polish off with a cloth.How often should I oil my fretboard?
It is therefore vital to remember that you should practice moderation when oiling your fretboard. Most commercial guitar manufactures suggest that you oil your fretboard once every six months.What household items can you use to clean a fretboard?
You may simply use household items like lemon oil and a damp wash cloth to clean your fretboard. In order to clean the strings, you can simply use a towel or a cleaning kit. It's important to clean the guitar so that it stays playable for years to come.How do you shine frets?
What is the point of having shiny frets without a nice clean fretboard? After the tape is removed, drip some oil soap on the fretboard. You can use the same piece of #0000 steel wool to rub the oil soap into the wood and clean the fretboard. Then wipe the excess oil soap off the fretboard with a rag.How do you clean your guitar?
5 Tips for Cleaning Your Guitar: Wipe the strings, neck and bridge often with a lint-free cloth. Wipe metal parts clean with a soft, dry polishing cloth. You don't need to spray anything on them; simply wiping them off will usually suffice quite nicely. 
