Connect the green cable of your speaker system between "Line out 1/front" of the computer and the "front" jack of your speaker system's subwoofer. This connection and the following connections are achieved by simply plugging the 3.5 mm minijack plug on each end of the cable into the appropriate jack.
.
Beside this, where do I plug my speakers into my computer?
Plug the speaker cable into the green “Line-out” jack of a desktop computer. Often, this cable will also have a green colored connector. Plug the speaker cable into the headphone jack of a laptop. Plug the power cord from the speakers into an electrical socket and turn the speakers on.
One may also ask, can I connect regular speakers to my computer? Old speakers with some life left in them can be hooked up to a computer for kicking stereo sound. A Y-adapter for audio applications also will be needed to convert the RCA jacks from the amplifier into a mini-plug connection for the computer. The entire setup should take less than 10 minutes.
Also, how do I connect laptop to speakers?
How to Connect Speakers to a Laptop
- 1Attach speakers to your laptop by plugging them into the appropriate connection on your CPU, laptop, or monitor.
- 2From the Desktop, press Win+I.
- 3Click Hardware and Sound; then click the Manage Audio Devices link.
- 4In the resulting Sound dialog box, double-click the Speakers item.
How do I connect Logitech speakers to my computer?
Connect the cable from your subwoofer to the line-out, or green, speaker port on your computer. If you have a 5.1 sound system, connect the green cable to the green port, the orange cable to the "Center/Subwoofer" port on your computer, and the black cable to the "Rear" port on your computer.
Related Question AnswersHow do I connect headphones and speakers to my computer?
Use Speakers & Headphones At The Same Time In Windows 10- Step 1: Connect your headphone to your PC and make sure that the speakers are also connected.
- Step 2: Right-click on the volume icon in the taskbar and then click Sounds option to open Sounds dialog.
How do I connect my TV to speakers?
Connect an HDMI cable to the HDMI ports labeled ARC or the port identified in your manual that supports ARC. On your TV menu, set Speakers to Audio system. Note: This is an example of how to change this setting on an Android TV™: On the remote control, press the HOME button.How do I connect my Logitech z906 speakers to my TV?
Plug in all the connections to the TV, including audio. Plug in a 3.5mm to stereo RCA adapter to your TV's headphone port. Take RCA analog cables to the back of the Z906 sub, and leave the sub set on the input for that. This way, whatever input you switch the TV to, it sends the audio signal to the speakers.Is Logitech z506 good?
If you've never experienced true 5.1 surround sound, have a capable sound card and your content primarily resides on your PC, the $100 Logitech Z506 are a fantastic introduction, but we can't honestly recommend them over the company's far-more flexible X-540 set -- the obvious choice at the $90 you can presently findHow do I connect my 5.1 speakers to my TV?
Follow these steps to connect the devices:- Unplug the TV and audio equipment before you make any connection.
- Use the RCA audio cables to connect one end to the AV out L/R output jacks at the back of the TV.
- Connect the other end to the audio input jacks of the audio equipment.
- Turn on the TV and select a program.
How do I hook up 5.1 surround sound to my PC?
Open the Start menu on your computer and click “Control Panel.” Type “sound” in the search box, click “Sound” in the results and open the “Playback” tab of the dialog box. Click your surround sound speaker icon, click the “Configure” button and then select “5.1 Surround” as your speaker type.How do I hook up Logitech TV?
Steps- Turn on the Logitech mouse. The On/Off switch is located on the bottom of the Mouse.
- Plug in the wireless receiver. The wireless receiver is a small USB device that you can plug into any open USB port on your PC or Mac.
- Press the Connect button. The Connect button is on the bottom of the wireless mouse.
How do I pair my Logitech wireless speaker?
1. Go to Settings and Networks and select Bluetooth. 2. Select name of the Logitech device you want to connect from the list of available devices and click Pair.What is the color of the speaker jack on a computer?
Identify the audio jacks on the back of your computer. Unless your computer is very old, the jacks are color-coded green for line-out -- for speakers or headphones -- blue for line-in and pink for a microphone. The microphone and speaker jacks may also have small images next to them.Where do you plug speakers into a computer?
Plug the speaker cable into the green “Line-out” jack of a desktop computer. Often, this cable will also have a green colored connector. Plug the speaker cable into the headphone jack of a laptop. Plug the power cord from the speakers into an electrical socket and turn the speakers on.How do I connect Logitech speakers to my phone?
How to Connect a Bluetooth Speaker to an Android Phone- Open your Settings app.
- Navigate to Connected devices, and flip the switch to enable Bluetooth, if it's not already enabled.
- Tap Bluetooth to view the options.
- Select Pair new device to place your Bluetooth device in pairing mode.
